Home / Grades / PBAT Express Packaging Film

Blown film grade for express delivery & e-commerce packaging bags

PBAT Express Packaging Film

Product Summary

PBAT Express Packaging Film

Formulated for high-speed mailer converting, this grade holds print registration and heat-seal integrity on courier bag lines. It resists puncture through sorting and transport while remaining biodegradable after use.

This grade belongs to the E-commerce & Express family, uses a Blown film extrusion route, and is supplied as Bag film roll stock for converters serving biodegradable packaging and agricultural markets.

Express mailers, courier bags, e-commerce packaging and garment bags.

Enquire About This Grade

Specification

Grade Parameters

The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.

ModelBlown film grade for express delivery & e-commerce packaging bags
Film FamilyE-commerce & Express
Process RouteBlown film extrusion
Supply FormatBag film roll stock
Material BasePBAT
CAS Number55231-08-8
Density1.25 g/cm³ (ISO 1183)
Melting Point110-120 °C (ISO 11357)
Melt Flow Rate2.5-4.5 g/10 min at 190 °C, 2.16 kg (ISO 1133)
Tensile Strength≥25 MPa (ISO 527)
Elongation at Break≥400% (ISO 527)
Film quality testing

What Sets It Apart

Grade-Specific Behavior

Formulated for high-speed mailer converting, this grade holds print registration and heat-seal integrity on courier bag lines. It resists puncture through sorting and transport while remaining biodegradable after use.

That behavior is achieved through the Blown film extrusion route and the PBAT material base, without changing the compostable character of the finished film.

It makes this grade a practical choice for Express mailers, courier bags, e-commerce packaging and garment bags.

Processing Advice

Processing Recommendations

The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

01Line SetupUse controlled melt pressure and a consistent die gap, then condition the film before printing to stabilise dimensions. Align seal jaws with the film's heat-seal window.
02Material HandlingKeep rolls and compound dry before processing, and avoid prolonged residence time at high melt temperature.
03Quality CheckVerify gauge, seal strength and clarity on the first production rolls before committing the full run.
PBAT Express Packaging Film

Applications

Where This Grade Fits

Express mailers, courier bags, e-commerce packaging and garment bags.

Its balance of PBAT and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.

For a broader view, compare this grade against the other 1 options in the same family on the applications page.

View All Applications

Packaging & Delivery

How the Grade Arrives

Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.

01Roll FormWound on cores suitable for standard converting equipment, with identity labels on every roll.
02DocumentationEach shipment is accompanied by handling guidance and the grade specification shown above.
03StorageKeep rolls in a dry, shaded area and process within the normal storage life of PBAT film.

Related Grades

Similar Film Grades

These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.

20 Micron PBAT Bag Film
20 microns PBAT biodegradable compostable film for making bagsView grade →
PBAT PLA Blown Film Blend
PBAT & PLA blend blown film grade (carrier, waste & produce bags)View grade →
Pure PBAT Blown Film Grade
Pure PBAT blown film grade (carrier bags, garbage bags, mulch film)View grade →

Related Reading

Technical, Knowledge and Commercial Notes

Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.