Home / Grades / PBAT PLA Blown Film Blend

PBAT & PLA blend blown film grade (carrier, waste & produce bags)

PBAT PLA Blown Film Blend

Product Summary

PBAT PLA Blown Film Blend

The PBAT and PLA blend raises stiffness and sealability while PBAT preserves tear resistance, a combination used where a bag must stand open on a rack yet remain fully biodegradable. The PLA fraction improves print surface quality on store-facing packaging.

This grade belongs to the Carrier & Retail Bags family, uses a Blown film extrusion route, and is supplied as Blown film roll stock for converters serving biodegradable packaging and agricultural markets.

Carrier bags, waste bags, produce bags and printed retail packaging.

Enquire About This Grade

Specification

Grade Parameters

The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.

ModelPBAT & PLA blend blown film grade (carrier, waste & produce bags)
Film FamilyCarrier & Retail Bags
Process RouteBlown film extrusion
Supply FormatBlown film roll stock
Material BasePBAT / PLA blend
Film quality testing

What Sets It Apart

Grade-Specific Behavior

The PBAT and PLA blend raises stiffness and sealability while PBAT preserves tear resistance, a combination used where a bag must stand open on a rack yet remain fully biodegradable. The PLA fraction improves print surface quality on store-facing packaging.

That behavior is achieved through the Blown film extrusion route and the PBAT / PLA blend material base, without changing the compostable character of the finished film.

It makes this grade a practical choice for Carrier bags, waste bags, produce bags and printed retail packaging.

Processing Advice

Processing Recommendations

The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

01Line SetupPre-blend pellets uniformly and dry PLA-containing compounds before extrusion. Use a gradual temperature profile to protect the PLA phase from thermal degradation.
02Material HandlingKeep rolls and compound dry before processing, and avoid prolonged residence time at high melt temperature.
03Quality CheckVerify gauge, seal strength and clarity on the first production rolls before committing the full run.
PBAT PLA Blown Film Blend

Applications

Where This Grade Fits

Carrier bags, waste bags, produce bags and printed retail packaging.

Its balance of PBAT / PLA blend and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.

For a broader view, compare this grade against the other 4 options in the same family on the applications page.

View All Applications

Packaging & Delivery

How the Grade Arrives

Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.

01Roll FormWound on cores suitable for standard converting equipment, with identity labels on every roll.
02DocumentationEach shipment is accompanied by handling guidance and the grade specification shown above.
03StorageKeep rolls in a dry, shaded area and process within the normal storage life of PBAT film.

Related Grades

Similar Film Grades

These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.

20 Micron PBAT Bag Film
20 microns PBAT biodegradable compostable film for making bagsView grade →
Pure PBAT Blown Film Grade
Pure PBAT blown film grade (carrier bags, garbage bags, mulch film)View grade →
Corn Starch PBAT Film Roll
Corn Starch PBAT Sustainable Compostable Biodegradable Film RollView grade →

Related Reading

Technical, Knowledge and Commercial Notes

Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.