Home / Grades / High-Strength PBAT Stretch Film

PBAT biodegradable Film High-Tensile-Strength Pallet Stretch

High-Strength PBAT Stretch Film

Product Summary

High-Strength PBAT Stretch Film

High tensile strength and controlled cling let this stretch film stabilise pallet loads with fewer wraps, cutting material use per pallet. The film keeps its hold through changes in warehouse temperature.

This grade belongs to the Pallet Stretch family, uses a Cast / stretch film extrusion route, and is supplied as Stretch film roll for converters serving biodegradable packaging and agricultural markets.

Pallet wrapping, warehouse stabilisation and unit-load protection.

Enquire About This Grade

Specification

Grade Parameters

The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.

ModelPBAT biodegradable Film High-Tensile-Strength Pallet Stretch
Film FamilyPallet Stretch
Process RouteCast / stretch film extrusion
Supply FormatStretch film roll
Material BasePBAT
CAS Number55231-08-8
Density1.25 g/cm³ (ISO 1183)
Melting Point110-120 °C (ISO 11357)
Melt Flow Rate2.5-4.5 g/10 min at 190 °C, 2.16 kg (ISO 1133)
Tensile Strength≥25 MPa (ISO 527)
Elongation at Break≥400% (ISO 527)
Film quality testing

What Sets It Apart

Grade-Specific Behavior

High tensile strength and controlled cling let this stretch film stabilise pallet loads with fewer wraps, cutting material use per pallet. The film keeps its hold through changes in warehouse temperature.

That behavior is achieved through the Cast / stretch film extrusion route and the PBAT material base, without changing the compostable character of the finished film.

It makes this grade a practical choice for Pallet wrapping, warehouse stabilisation and unit-load protection.

Processing Advice

Processing Recommendations

The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

01Line SetupRun on standard stretch film lines and adjust wrap tension to the load profile. Verify cling-layer balance on the first production rolls before changing line speed.
02Material HandlingKeep rolls and compound dry before processing, and avoid prolonged residence time at high melt temperature.
03Quality CheckVerify gauge, seal strength and clarity on the first production rolls before committing the full run.
High-Strength PBAT Stretch Film

Applications

Where This Grade Fits

Pallet wrapping, warehouse stabilisation and unit-load protection.

Its balance of PBAT and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.

For a broader view, compare this grade against the other 4 options in the same family on the applications page.

View All Applications

Packaging & Delivery

How the Grade Arrives

Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.

01Roll FormWound on cores suitable for standard converting equipment, with identity labels on every roll.
02DocumentationEach shipment is accompanied by handling guidance and the grade specification shown above.
03StorageKeep rolls in a dry, shaded area and process within the normal storage life of PBAT film.

Related Grades

Similar Film Grades

These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.

Related Reading

Technical, Knowledge and Commercial Notes

Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.

Polymer molecular structure
KnowledgeCompostability Basics for High-Strength PBAT Stretch FilmRead article →
Biodegradable film rolls
CommercialHigh-Strength PBAT Stretch Film: Applications and SupplyRead article →