Home / Grades / PBAT Paper Extrusion Coating

PBAT Extrusion Coating Film for Paper

PBAT Paper Extrusion Coating

Product Summary

PBAT Paper Extrusion Coating

Extrusion coating grade that bonds to paper and board, creating biodegradable barrier structures for cups, trays and wraps. Adhesion is developed without a non-compostable tie layer.

This grade belongs to the Lamination & Coating family, uses a Extrusion coating route, and is supplied as Coating grade resin and film for converters serving biodegradable packaging and agricultural markets.

Paper cups, food trays, fibre-based wraps and compostable barrier boards.

Enquire About This Grade

Specification

Grade Parameters

The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.

ModelPBAT Extrusion Coating Film for Paper
Film FamilyLamination & Coating
Process RouteExtrusion coating
Supply FormatCoating grade resin and film
Material BasePBAT
CAS Number55231-08-8
Density1.25 g/cm³ (ISO 1183)
Melting Point110-120 °C (ISO 11357)
Melt Flow Rate2.5-4.5 g/10 min at 190 °C, 2.16 kg (ISO 1133)
Tensile Strength≥25 MPa (ISO 527)
Elongation at Break≥400% (ISO 527)
Film quality testing

What Sets It Apart

Grade-Specific Behavior

Extrusion coating grade that bonds to paper and board, creating biodegradable barrier structures for cups, trays and wraps. Adhesion is developed without a non-compostable tie layer.

That behavior is achieved through the Extrusion coating route and the PBAT material base, without changing the compostable character of the finished film.

It makes this grade a practical choice for Paper cups, food trays, fibre-based wraps and compostable barrier boards.

Processing Advice

Processing Recommendations

The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

01Line SetupControl melt temperature and line speed for uniform coating weight. Prime or corona-treat paper where the surface requires additional bonding.
02Material HandlingKeep rolls and compound dry before processing, and avoid prolonged residence time at high melt temperature.
03Quality CheckVerify gauge, seal strength and clarity on the first production rolls before committing the full run.
PBAT Paper Extrusion Coating

Applications

Where This Grade Fits

Paper cups, food trays, fibre-based wraps and compostable barrier boards.

Its balance of PBAT and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.

For a broader view, compare this grade against the other 2 options in the same family on the applications page.

View All Applications

Packaging & Delivery

How the Grade Arrives

Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.

01Roll FormWound on cores suitable for standard converting equipment, with identity labels on every roll.
02DocumentationEach shipment is accompanied by handling guidance and the grade specification shown above.
03StorageKeep rolls in a dry, shaded area and process within the normal storage life of PBAT film.

Related Grades

Similar Film Grades

These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.

20 Micron PBAT Bag Film
20 microns PBAT biodegradable compostable film for making bagsView grade →
PBAT PLA Blown Film Blend
PBAT & PLA blend blown film grade (carrier, waste & produce bags)View grade →

Related Reading

Technical, Knowledge and Commercial Notes

Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.