Home / Grades / Pure PBAT Cast Film Grade

Pure PBAT cast/extrusion film grade (flexible packaging)

Pure PBAT Cast Film Grade

Product Summary

Pure PBAT Cast Film Grade

Cast extrusion grade delivering consistent gauge and high clarity for flexible packaging webs. The absence of a blown bubble gives tighter thickness tolerance across the roll width.

This grade belongs to the Flexible Packaging family, uses a Cast film extrusion route, and is supplied as Cast film roll for converters serving biodegradable packaging and agricultural markets.

Flexible packaging webs, flow wraps, liners and printable film structures.

Enquire About This Grade

Specification

Grade Parameters

The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.

ModelPure PBAT cast/extrusion film grade (flexible packaging)
Film FamilyFlexible Packaging
Process RouteCast film extrusion
Supply FormatCast film roll
Material BasePBAT
CAS Number55231-08-8
Density1.25 g/cm³ (ISO 1183)
Melting Point110-120 °C (ISO 11357)
Melt Flow Rate2.5-4.5 g/10 min at 190 °C, 2.16 kg (ISO 1133)
Tensile Strength≥25 MPa (ISO 527)
Elongation at Break≥400% (ISO 527)
Film quality testing

What Sets It Apart

Grade-Specific Behavior

Cast extrusion grade delivering consistent gauge and high clarity for flexible packaging webs. The absence of a blown bubble gives tighter thickness tolerance across the roll width.

That behavior is achieved through the Cast film extrusion route and the PBAT material base, without changing the compostable character of the finished film.

It makes this grade a practical choice for Flexible packaging webs, flow wraps, liners and printable film structures.

Processing Advice

Processing Recommendations

The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

01Line SetupUse a cast film line with chill-roll control and adjust draw-down ratio to reach the target gauge. Keep the chill roll clean to preserve optical quality.
02Material HandlingKeep rolls and compound dry before processing, and avoid prolonged residence time at high melt temperature.
03Quality CheckVerify gauge, seal strength and clarity on the first production rolls before committing the full run.
Pure PBAT Cast Film Grade

Applications

Where This Grade Fits

Flexible packaging webs, flow wraps, liners and printable film structures.

Its balance of PBAT and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.

For a broader view, compare this grade against the other 5 options in the same family on the applications page.

View All Applications

Packaging & Delivery

How the Grade Arrives

Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.

01Roll FormWound on cores suitable for standard converting equipment, with identity labels on every roll.
02DocumentationEach shipment is accompanied by handling guidance and the grade specification shown above.
03StorageKeep rolls in a dry, shaded area and process within the normal storage life of PBAT film.

Related Grades

Similar Film Grades

These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.

21 Micron High-Strength PBAT Film
21-micron transparent high-strength biodegradable packaging filmView grade →

Related Reading

Technical, Knowledge and Commercial Notes

Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.