

Product Summary
A melt-blown PBAT grade for biodegradable nonwoven webs used in filtration, hygiene and agricultural cover materials. The resin supports fine fibre formation without a non-biodegradable carrier.
This grade belongs to the Nonwovens & Filters family, uses a Melt-blown nonwoven extrusion route, and is supplied as Melt-blown resin grade for converters serving biodegradable packaging and agricultural markets.
Filter materials, hygiene nonwovens, agricultural covers and disposable protective layers.
Enquire About This GradeSpecification
The table separates format information from resin-level data. Format fields describe how this grade is supplied, while resin values describe the PBAT base where the grade is a pure PBAT formulation.
| Model | PBAT melt-blown grade (biodegradable nonwovens & filter materials) |
| Film Family | Nonwovens & Filters |
| Process Route | Melt-blown nonwoven extrusion |
| Supply Format | Melt-blown resin grade |
| Material Base | PBAT |
| CAS Number | 55231-08-8 |
| Density | 1.25 g/cm³ (ISO 1183) |
| Melting Point | 110-120 °C (ISO 11357) |
| Melt Flow Rate | 2.5-4.5 g/10 min at 190 °C, 2.16 kg (ISO 1133) |
| Tensile Strength | ≥25 MPa (ISO 527) |
| Elongation at Break | ≥400% (ISO 527) |

What Sets It Apart
A melt-blown PBAT grade for biodegradable nonwoven webs used in filtration, hygiene and agricultural cover materials. The resin supports fine fibre formation without a non-biodegradable carrier.
That behavior is achieved through the Melt-blown nonwoven extrusion route and the PBAT material base, without changing the compostable character of the finished film.
It makes this grade a practical choice for Filter materials, hygiene nonwovens, agricultural covers and disposable protective layers.
Processing Advice
The following guidance gives a starting point for line setup. Adjust settings against your own equipment and measured film properties.

Applications
Filter materials, hygiene nonwovens, agricultural covers and disposable protective layers.
Its balance of PBAT and process behaviour makes it suitable where biodegradable end of life matters as much as line performance.
For a broader view, compare this grade against the other 1 options in the same family on the applications page.
View All ApplicationsPackaging & Delivery
Film is supplied in roll form with the grade name, gauge, width and batch identity marked on each roll. Rolls are protected during transport so the film surface arrives clean and ready for converting.
Related Grades
These grades share the same film family or process route. Review them side by side when the exact balance of stiffness, clarity or gauge is still open.



Related Reading
Each grade is supported by three short articles covering processing, material behaviour and application fit. Follow the links below for the full text.


